×
Kısa destek açıklama alanı ...
Kısa destek açıklama alanı ...
Engine maintenance, which is the heart of an automobile, and, if necessary, renewal (overhaul) is öimportant. &Cedil;&Because & The humidity of the engine, which runs smoothly and without any problems, in displaying your vehicle's factory output performance without any problems, is enormous. Choosing an address where you can get engine replacement service is also an extremely öimportant issue.
It is the process of removing chips from the cylinder. The insides of the cylinders are processed according to the dimensions of the pistons to be used. Purpose; According to the pistons that will use the insides of the cylinders, it is to leave the required chip share for the honing process.
It is the preparation of cylinder surfaces so that the circlips can work and an oil film can form. The roughness of the surface that emerges as a result of the honing process, the engine's lifespan; is the most important factor that determines.
Main bearing and piston rod bearing of the cylinder block It is a renewal process to bring the values or deformation caused by various reasons to the required level by processing in the main or arm busbar machine.
;arm bushings are replaced with new ones and processed into the required gauge so that the new pins can work. For sleeve caps In case of ovality/taperedness in the sleeves, the sleeve caps are barred into a standard member.
The wear and tear that occurs in the journals of the crankshaft; malfunctions are corrected by grinding the crankshaft. Crank grinding is the precision grinding of cylindrical surfaces on crankshaft journals. It is made by taking into account the specifications of the manufacturers.
Crankshaft journals are polished to obtain a good surface quality and oil film lubricity.
Diamond Change, Press and Turning
Worn &ooml;milks are pressed & removed from the engine block. The block is brought to a certain temperature, the shirts are pressed and taken to rest for a while. Cylinder interiors, standard & values.
